Джабба нажал на клавиатуре несколько клавиш, и картинка на экране изменилась. В левом верхнем углу появилось послание Танкадо: ТЕПЕРЬ ВАС МОЖЕТ СПАСТИ ТОЛЬКО ПРАВДА Правая часть экрана отображала внутренний вид мини-автобуса и сгрудившихся вокруг камеры Беккера и двух агентов. В центре возник нечеткий из-за атмосферных помех кадр, который затем превратился в черно-белую картинку парка. – Трансляция началась, – объявил агент Смит.

Это было похоже на старое кино.

 
 

 

部屋の汚れは心の汚れ（園田）: ムッシュ HAIR CLUB スタッフブログ.SP Important improvements and fixes | Tekla User Assistance

 

This page summarizes the new 201 and improvements in Tekla Structures versions and service packs between Tekla Structures SP6 and Note that this page is a summary and does not replace the release notes, and that some service packs only have the fix list.

Follow the links on the page to read the full release notes content of a Tekla Structures version and service pack. This tekla structures 2017 sp9 free is updated when a new Tekla Structures version or service pack is released. Release notes – Tekla Structures SP6.

Release notes – Tekla Structures SP5. Http://replace.me/6703.txt notes – Tekla Structures SP4. In Drawing content managerthe column sorting is now cumulative. Now you can save and load base point settings in the Base point dialog box. The automatic attachment of rebar set bars to concrete parts has been improved.

This error tekla structures 2017 sp9 free been fixed tekla structures 2017 sp9 free Tekla Structures SP4 version. The SP3 version is not available in Tekla Downloads anymore. We узнать больше installing the SP4 version.

Release notes – Tekla Structures SP2. Clash check manager has several узнать больше здесь. For example, it is now possible to check clashes between reference models and components, use a negative value for the minimum distance, and use the set Tekla Structures units as the minimum distance.

The automatic bar parenting algorithm for нажмите сюда sets has been improved for cases where bars are inside more than one concrete part. The IFC4 Export dialog box structured a new Cast-in-place export dropdown, which allows you to select more precisely what to include in the cast-in-place export. You can now refresh the selected reference model.

The reference model list now supports saving of empty reference model groups. You can now insert multiple point clouds at once. Text rendering is faster now in drawing FOG rendering. Drawing mark content text is now loaded correctly in all user interface languages.

The dimensioning method Filter has a new Only objects on the selected structurs check box in rule driver windows 10 32 bit allowing you to only dimension objects that are on a certain side of the main part. Export Unitechnik 79 : There are improvements in exporting meshes. Release notes strutcures Tekla Structures SP1. Clash check between point structtures and pour objects tekla structures 2017 sp9 free now supported.

Relabel section views is a new drawing macro for updating section syructures labels. Relabel detail views is a new drawing продолжить for updating detail view labels.

New fabrication drawings – create single-part, assembly and cast unit drawings more efficiently. The new Create fabrication drawing functionality allows you to create drawings by using saved settings predefined for different model objects, or by using existing drawings in your model as templates.

New reinforcement object type – rebar assembly. Tekla Structures introduces rebar assemblya reinforcement object type that structurws tekla structures 2017 sp9 free any reinforcement object types. Rebar assemblies are useful when you model reinforcement cages tekla structures 2017 sp9 free custom meshes that will be prefabricated, for example.

The rebar assembly modeling commands can be found on the Rebar ribbon tab, under Assembly. You can now ссылка на подробности drawings for rebar assemblies with the new Create fabrication drawing command, define view-specific rebar assembly representation settings on the Rebar assembly tab in drawing view properties, and add assembly position in reinforcement marks tree tekla structures 2017 sp9 free notes.

Updated spacing settings and other reinforcement improvements. Читать больше Structures comes with updated spacing settings, curved leg по этому сообщению, performance improvements, and some new properties for rebar sets.

For reinforcement objects, the Inquire center of gravity command can now be used, and many property panes have been partly rearranged. There are also tskla in Rebar shape manager. New rendering modes for reference models. You can now control the reference model and overlay model visualization separately from parts and components.

Use the new commands on the ribbon: Structured wireframeReferences shaded wireframeReferences grayscaleReferences renderedor Show only selected reference. New way to control pour unit visibility in Organizer. You can now control in Organizer whether pour units or cast-in-place cast units are used as the highest shructures hierarchy level in Organizer.

Changes in managing Tekla Structures. Some of the general settings used for managing Tekla Structures have been changed in version Modeling improvements. Tekla structures 2017 sp9 free Structures comes with many enhancements related to modeling, for example:.

The autosave interval for model changes is now based нажмите чтобы перейти time, not on the number of commands as previously. Visualization of the bolts has been improved. Default value for top-in-form face.

New material information file for Trimble Connect Visualizer. Improvements in the shape catalog. When you select a shape in the Shape catalog or Select shape dialog structurds, you tekla structures 2017 sp9 free now tekla structures 2017 sp9 free a preview of the selected shape in the upper right corner of the dialog box.

In the preview, you can zoom in and out by scrolling with the mouse wheel, rotate the shape using the left mouse button, pan using the middle mouse button, and adjust the viewing angle using the right mouse button.

Drawing improvements. Tekla Structures introduces new functionality, improvements, and changes in rendering, snapping, trkla, handling view frames, accessing property dialog boxes, hatches, dimensioning and dimensioning performance, Document manager2D Libraryrebar pull-outs and marking, rebar group marking, layout names, handling non-solid lines, and handling fonts.

IFC improvements. In Tekla Structures versionyou have better control over IFC entities, and you can filter the нажмите для деталей that you want to include in the IFC4 export.

Defining the property sets for the IFC export is now easier and more reliable tekla structures 2017 sp9 free to the improvements in the property set definition dialog box and functionality. Bridges are now supported in the IFC4 export. Interoperability improvements.

Tekla Structures introduces new features, improvements and other changes in NC file DXF converter, Trimble Connector, Tekla PowerFab export, Trimble Connect Visualizer, rree models and reference model performance, rebar set export, and point cloud properties. Also direct links to analysis and design software have been updated.

Updates in tools посмотреть больше automated precast fabrication. Improvements in components. There are several improvements in concrete components and steel components in Tekla Structures Improvements ffree Template Editor, templates, and 2107. There are several improvements in separators, and structkres in extending and trimming operations. Also, it is now structuges to have 32nd and 64th precision in templates, reports, marks and strutcures in imperial units.

Tooltip improvements. Tooltips for some of the frequently used ribbon commands, both in the modeling and in the drawing mode, now include struxtures images. Strucyures in advanced options. In Tekla Structures versionthere are some new advanced основываясь на этих данных, and some of the advanced options have been deprecated. Как сообщается здесь, the ссылка на продолжение of some of the advanced по ссылке has tekla structures 2017 sp9 free changed.

Changes in frfe attributes. Tekla Structures introduces some new and improved template attributes. Administrator’s release notes: Reorganization of folders in the Tekla Struvtures installation strictures.

Tekla Structures includes some changes that fres not compatible with previous versions. These changes require you to take читать when you upgrade Tekla Structures. The folders strkctures the Tekla Structures installation folder have tkela reorganized to tekla structures 2017 sp9 free http://replace.me/21304.txt packaging of the product and new methods of delivering content in the future. Some new 20177 have been created.

Some previous folders have been moved or removed. The previous content of some folders has been moved to other locations. Release notes – Tekla Structures SP The rollover highlight color of reference model objects is now transparent, and the objects behind reference model objects can be seen and selected.

Release notes – Tekla Structures SP9. Drawing mark content text is now loaded correctly in all languages. You can now separately refresh individual reference models. In Unitechnik export, the previous Turned to pallet option for Export meshes as on the Reinforcement tab has been renamed to Turned to pallet longest wire on X axis.

In Unitechnik export, Turned to pallet bent wire on X axis is a tekla structures 2017 sp9 free option for Export meshes as on the Reinforcement tab that exports meshes rotated to the pallet plane with bent wires parallel with the X axis of the pallet. Release notes – Tekla Structures SP8. Release notes – Tekla Structures SP7.

The TDX point cloud file format is now supported. Snapping now works according to the selected snap switch when adding level marks in a drawing. Custom components and the autosave functionality have http://replace.me/1937.txt fixes. There is a new Zoom selected command both in the modeling mode tekla structures 2017 sp9 free in the drawing tekla structures 2017 sp9 free. The ribbon drop-down list behavior has been changed.

 
 

Account Suspended – 2012年06月14日

 
 

We recommend that you install the latest environments to ensure that the environments work correctly in the service pack. We recommend that you update all the environments that you are using. See also Install a Tekla Structures service pack. This has now been fixed, and using the Enter key to complete the numeric input does not end the direct modification commands anymore.

Previously, the Undo command did not work as expected. This has now been fixed, and Undo works again. When objects. Sometimes when multi-user models were saved, the length of some bolts might have changed. Sometimes, Tekla Structures might have stopped working when objects were copied or moved to another object in the model. This does not happen anymore. Previously, Tekla Structures process stayed running in the background when Tekla Structures was closed while a command was active.

Non-geometrical updates, such as changing the bolt type from Site to Workshop , now mark bolts as modified. This issue has now been fixed, and the BO block for such holes is always created on the back profile face. Export Unitechnik 79 : Previously, some reinforcing bars copied from an existing braced girder were recognized as braced girders. This issue has now been fixed, and only elements specified by class or by name are recognized as braced girders.

Export Unitechnik 79 : If a contour polygon contains edges shorter than 10 mm, a notification will be added in the Unitechnic log file. Export Unitechnik 79 : Previously, the Z coordinate of the electric tubes was not exported at all. Skip to main content. Development area – Any – Import, export, interoperability concrete Concrete components Import, export, interoperability steel Core Drawings Import, export, interoperability Modeling Numbering Steel components System and options Tekla Model Sharing Templates and reports.

TSAC Concrete components Concrete console : Previously, rebar sets could be copied from the input part when you made any changes to the component.

TSAC Concrete components Mesh bars by area : When applying side distances for rebars, the same shape area is now always reinforced in the same manner, regardless of the polygon settings. TSAC Concrete components Corbel reinforcement 81 : For double corbels, when the Follow shape setting was set to horizontal, the main bar creation started at the wrong height.

TSAC Steel components Wall rails 1 : The top bracket is not duplicated anymore when using a component to create a bracket. TSAC Steel components Joining plates 14 : Previously, welds between the stiffeners and the main or secondary part were not created.

TSAC Steel components No paint area : Previously, when you loaded a surface treatment attribute file in the No paint area tool, the depth offset was not displayed correctly in the US imperial environment. TSAC Steel components Column with stiffeners : Previously, an incorrect gap was created between the shear tab and the main part when doubler plates were created. Loop Pro. Win64 solidThinking. Win64 e-Xstream. Digimat v Win64 FARO. SolidWorks maxmess-software. SolidWorks Trimbe.

R PointCab Pro v3. Win PVTsim Nova v4. Linux64 Tekla. Plugins PSS E v Win64 ESI. Win64 Willmer Project Tracker v4. Linux Golden Software Grapher v Linux64 Numeca.

Linux64 LMS Raynoise v3. Win32 neoStampa v8. Win64 InventorCAM. Win64 3Dflow. Win64 ABViewer Enterprise You can show or hide rebar set guidelines in model views. Reinforcement selection switches now have keyboard shortcuts. Leg faces have been improved. There are improvements in Rebar shape manager.

Improvements in drawings. Drawing views have been improved. There are new settings for section views, and the drawing view frames are now hidden until you move the cursor over the view. Reinforcement drawing properties have been improved. A new representation option outline ignore holes has been added for meshes. Reinforcement group marks have been improved. The number of available leader line options for reinforcement group marks has been increased. There are improvements in dimensioning and in dimension tags.

There are improvements in Document manager , for example, a new indicator for cells that cannot be edited and new category association options. Improvements in rebar drawing tools. There are improvements in Rebar group marking , Rebar pull-out picture and marking , and Rebar group dimensioning.

Printing to multiple printers and other printing improvements. You can print to more than one printer at one go based on the paper size of each selected drawing. When printing to multiple printers you typically have different printers for handling different paper sizes. Tekla Structures automatically selects the appropriate printer for each drawing.

Tekla Model Sharing has several improvements. For example, reasons of write out failures are now stored in log files to simplify troubleshooting, and pour management is more robust than ever before. Changes in Tekla Structures installation. Starting from Tekla Structures SP1, you can select in the environment installation wizard that the environment.

New structure of firm and project folders. You can create user-defined sub-folders under the firm and project folders and store property files in the sub-folders. There are improvements in reference models. Reference model objects can no longer be locked. There are improvements in IFC object conversion.

You can now use point clouds through the internet. The 3D DGN export has been renewed. The 3D DWG export has been renewed. Updates in tools for concrete fabrication. Joining plates 14 , Tube gusset 20 , Tube crossing 22 , Stiffened end plate 27 , Shear Pl to tube column 47 , Purlin 1 61 , Partial stiff end plate 65 , Railings S77 , Bridging 80 , End plate , Stub connection , Two sided end plate , End plate , Full depth , JP Full depth special , Column with stiffeners , Column with stiffeners , Stiffeners , Base plate , Stiffened base plate , Doubler plate , Stiffeners , U.

Base plate New advanced options:. Fixes released in Tekla Structures i. Modifiers and splitters now adapt to the new geometry when copying rebar sets. Pour objects now follow the neighbor part object level settings. Point cloud web streaming cache was added. The SketchUp model version support has been added.

PDF reference models now have better coverage for texts. Export Unitechnik 79 improvements:. You can now use quotation marks in object names consisting of strings with multiple words. External definition file – New way to control exported reinforcement.

Embedded anchors 8 improvement: You can now select whether to detect braced girders in the whole assembly. The show selected documents only mode has been improved in Document manager.

There are improvements in issuing drawings. The order of drawings in the Print Drawings dialog box has been improved. Curved line accuracy has been increased in reference models. There are useful new features and improvements in pours, rebar sets, marks, and IFC export.

You can now copy and move manually created section marks. There are useful new features and improvements in. You can now select in the environment installation wizard that the environment. Environment installers are now.

Other changes include a new environment for Canada and only one US environment that contains both metric and imperial roles. The new Bridge Designer role gives access to advanced tools relevant to boosting bridge design productivity. Licensing updates. Tekla Structures introduces online licensing in some of the configurations. Some product names in licensing have been changed. Updates to start screen, side pane, Quick Launch, and project properties.

Tekla Structures introduces a renewed user interface with a new, neutral color scheme, emphasizing the clarity of the ribbon and icons. This new blue-based color scheme is in accordance with the color scheme of other Trimble products.

All tabs of the Tekla Structures start screen have their own dedicated views. Quick Launch has been improved and redesigned. Tekla Structures now opens only one side pane window at a time by default.

The Project properties in the File menu now works more like the property pane. Updates to part labels, clip planes, and window options. Deleting clip planes has been made easier. Listing of view windows has changed so that the views are listed in alphabetical order. New way to find and select objects in model and drawings: Select by identifier. This works both in the modeling mode and in the drawing mode.

Radial grids and grid properties in the property pane. You can now create truly radial grids. Previously, you could create only rectangular grids. The properties of rectangular grids, radial grids, and single grid lines are accessed through the property pane. New plate type for bent plates: stand-alone bent plate. You can now create stand-alone bent plates that do not require any input parts. Use stand-alone bent plates to model both cylindrical and conical parts, such as hoods, hoppers, cones, and so on.

New curved construction objects and other improvements. Tekla Structures introduces two new construction objects, construction arc and construction polycurve. There is a new command to copy construction lines, circles, arcs, and polycurves in the direction that you indicate, and using the offset values that you specify. You can also change a construction line to an arc.

Construction circles and lines have been improved. Modeling and detailing improvements. Snapping has been improved to make it work better with the Ortho tool. There are improvements in bolt holes and welds. For example, there is now a new option in the Bolt properties that you can use to specify which plies of the connection do not get holes.

There are improvements in adding and removing pour unit content, placing items in the model, and numbering. You can use the new Shape cleaner application for cleaning the shape geometries in Tekla Structures models.

Rounding, step tapering, cranking, and other rebar set improvements. You can round rebar set bar lengths in the model. You can define whether rebar set bars are tapered at slanted part edges and how the tapering steps are created. You can create rebar set modifiers using the new Rebar set contextual tab for entire rebar sets, or for selected bar groups or bars.

There are improvements in splitters, end detail modifiers, and in modifying leg faces. There are new rebar display options on the Concrete ribbon. Clone selected in drawings. The new Clone selected feature clones existing annotation objects, drawing object representations and styles from selected source objects to selected target objects in GA drawings. With this feature, you can reduce manual repetition considerably. Improvements in Drawing content manager, marks and notes.

In Drawing content manager , you can now add new property columns to the list, and modify, move and hide existing property columns. There are now some new building object categories included. There is a new Align to a point command available on the Annotations tab on the ribbon that aligns the selected marks around a point. Layout editor improvements.

Placing and moving templates in drawing layouts is now much easier. Saving and closing of templates has also been changed. You can now drag dimension points from handles. You can display and change the dimension point associativity. You can now organize your documents in manual categories in Document manager.

Dragging in drawings has been made much easier and simpler. Reinforcement drawing tools have been improved. Drawing view labels have new alignment options. There are changes in drawing creation and snapshot creation.

Improvements in Template Editor 3. Template Editor 3. Printing improvements. There are updates especially in visualizing the line colors.

Printer colors and line widths are shown instantly in drawings. You can adjust drawing frames and fold marks in the Drawing Frame Properties dialog box. It is possible to include the revision mark to the drawing file name. Version control for drawings. You can now list different versions of the same drawing, show their snapshots, and change the current drawing version.

In Tekla Model Sharing , you can list the different versions of a drawing in conflict situations, and better control unintentional changes made to drawings. In shared models, you can list the different versions of a drawing in conflict situations and show drawing snapshots.

When you join a shared model, Tekla Model Sharing checks if the current Windows system locale is compatible with the system locale that was used when the model was shared. Printer device settings are shared when plotdev. There are improvements in the sharing operations performance with reference model objects, handling of parametric profiles, and handling of conflicting modifications. Scalability with the next generation sharing service has been enhanced.

Connectivity to the sharing service has been simplified. DWG export improvements. Some improvements have been made in the DWG export dialog box. For example, the preview now opens in a separate window, and on the Layer rules tab, there are new color codes indicating when a new DWG file is loaded, and when there are no layers in the DWG file.

There are some new confirmation messages in the DWG export. The exported block names now contain a drawing id to help the identification. You can now enter a relative location in the output folder definition. It has most of the Tekla BIMsight functionalities and some new functionalities as well. Tekla BIMsight support and maintenance is discontinued as of December 31, Tekla Web Viewer is not supported anymore in this version. Trimble Connect provides new, modern web technologies to replace the Tekla Web Viewer usage.

Embedded anchors 8 , Automated reinforcement layout – double tee beam 51 , Automated reinforcement layout – ledge spandrel 55 , Automated reinforcement layout – rectangular spandrel 56 , Beam reinforcement 63 , Stirrup reinforcement 67 , Strip footing reinforcement 75 , Seating with dowel 75 , Two sided seating with dowel 76 , Seating with dowel to flange 77 , Two sided seating with dowel to flange 78 , Round column reinforcement 82 , Rectangular column reinforcement 83 , Hole reinforcement for slabs and walls 84 , Started bars for footing 87 , Reinforced concrete stair 95 , Concrete console , Concrete beam-beam , Double wall edge and opening reinforcement , Mesh bars , Rebar coupler , Rebar end anchor , Wall layout , Wall layout T connector , Wall groove seam , Wall to wall connection.

Bolted gusset 11 , Joining plates 14 , Triangles generation 19 , Tube gusset 20 , Stiffened end plate 27 , Welded tee 32 , Haunch 40 , Cranked beam 41 , Seat conn type 1 52 , Wraparound gusset 58 , Hollow brace wraparound gusset 59 , Wraparound gusset cross 60 , Gusseted cross 62 , Partial stiff end plate 65 , HSS Brace special 66 , Rail connection 70 , Splice connection 77 , Clip angle , Welded beam to beam , Two sided end plate , End plate , Shear plate simple , Welded to top flange S , Full depth S , Offshore , Stiffened base plate Changed advanced options:.

Deleted advanced options:. New template attibutes:. There is a useful improvement in drawings:. There is a useful improvement in pours:. Property pane for cut, chamfer, surface treatment, surface, and point properties. You can now access the properties of cuts, chamfers, surface treatment, surfaces, and points in the property pane. Conical bent plates and other improvements in bent plate creation. You can now create conical bent plates. Previously, only cylindrical bent plates could be created.

There are also other improvements in bent plate creation. Large icons for toolbars and other user interface improvements. The usability of Tekla Structures has been improved.

For example, you can resize the icons on the toolbars, switch toolbars on and off, customize toolbars by hiding switches, and show parts in a view angle you select on the contextual toolbar. The default keyboard shortcut for direct modification has changed to D.

Better performance and other modeling improvements. There are improvements that enhance performance in models that contain items with imported shapes.

There are improvements in linking the Above line and Below line property values of welds. There are improvements in polygon welds, copying and moving objects, and in numbering.

Floor layout and Reinforced concrete stair 95 have been improved. Document manager has new quick access buttons for the Lock , Unlock , Freeze , Freeze off , Mark drawing ready for issuing , Unmark drawing ready for issuing , Issue , and Unissue commands. Rebar dimension mark placing has been improved. There are useful improvements in Document manager , printing, zooming, curved line accuracy in reference models,.

Show selected documents only mode and issuing work better now in Document manager. The order of drawings in the Print Drawings dialog box now matches the order they appeared in Document manager. Zoom to selected now works for templates in drawings. The accuracy of curved lines in reference models has been increased, and now there are four times more segments in curves.

There are improvements in the following components: Precast found block and U. Base plate connection There are useful improvements in drawings, IFC2x3 export, keyboard shortcuts, rebar set modifiers and guidelines, and template attributes. It is now faster to change object level settings in drawings. You can now easily synchronize your drawing sizes with the paper sizes that are used in printing.

This way, you can ensure that the drawing sizes that you use for your drawing layouts are also available for printing. The IFC2x3 export datetime property has been improved. You can now use new keyboard shortcuts to modify the part position of beams, polybeams, contour plates, and slabs, instead of using the Position options in the property pane or on the contextual toolbar.

The keyboard shortcuts work for both native Tekla Structures parts as well as for analysis parts. When modifying rebar sets, you can now change the direction of splitters, modifiers, and guidelines.

There are useful new features and improvements in rebar dimension mark properties, cloning, Rebar pull-out picture and marking , export, Tekla Model Sharing , and components:.

Rebar dimension mark properties now have their own dialog box in Tekla Structures. Having separate dialog boxes and settings files makes it easier to customize your rebar dimension properties, and still leave your other dimension properties unaffected.

Cloning is now more reliable. The Rebar pull-out picture and marking application has a new section for Presentation options. Tekla Model Sharing has been improved so that if you use a Trimble Connect folder as the project or firm folder, you can now see the progress of the data synchronization from the project or firm folder to the local model. There are several new features and improvements in the following components: Rectangular column reinforcement 83 , Edge and corner reinforcement 62 , Hollowcore reinforcement strands 60 , and Auto bolt.

There are useful new features and improvements in pours, rebar sets, marks, and IFC export:. The calculation of pour units has been improved to also attach non-solid items into overlapping pour objects. There are also improvements in pour calculation tolerance. There are improvements in rebar set splitters and in using rebar sets in custom components.

You can now copy and move manually created detail marks and section marks. Starting from Tekla Structures , the Steel Detailing configuration allows pour modeling if pours are enabled in the model. Easy creation of curved shapes: improvements in lofted plates and lofted slabs. The creation of lofted plates and lofted slabs has been further enhanced.

You can model even more complex curved shapes by using polycurve construction objects. Additionally, you can unfold lofted plates in single-part drawings. Improvements in geometry editing and items. There are new ways to start geometry editing, to add and show item vertexes, and to create items and shapes using existing parts in the model. Changes in numeric snapping and other modeling improvements.

There are improvements in numeric snapping. You can enter coordinate axis prefixes x , y , and z in the Enter a Numeric Location dialog box when you position or modify an object by using direct modification. You can again create construction circles on the view plane by picking two points: the center point and a point to define the radius of the circle. In Task manager , you can now select from 13 predefined options how the date and time are displayed in a task. You can now adjust the toolbar size and at the same time the icon size on the toolbars.

There is a new handle dragging option on the contextual toolbar. There are small improvements in the side pane window docking and in the customization of the contextual toolbars. Collecting the usage data is on by default.

Small changes in the appearance of model and model objects. The DirectX rendered model views have been improved. Part edge lines are shown as dashed lines in transparent model views. Model objects have thicker edge lines. Bar layering and other improvements in rebar sets. There are changes in commands that create rebar sets, for example, the new Create rebars by guidelines command for creating rebar sets. There are improvements in defining and adjusting bar layers in model views.

For example, the rebar set bar layer numbers are now shown on each leg face when you set the leg faces visible and select rebar set bars. Reporting bar layer information has been improved. There are new bar layer settings for rebar sets in the Options dialog box and in the user-defined attributes. There are new settings for defining concrete covers. There are changes in creating and modifying leg faces, and improvements in the secondary guidelines.

New user interface for rebar catalog. There is a new user interface for the rebar catalog. The rebar catalog contains definitions for reinforcing bars and strands. Show and modify drawing views in the model. You can show the drawing views of the selected drawings in any of the open model views to get a clearer understanding of exactly where a drawing view is located in the 3D model, the view direction, and the 3D extents of that view.

Improved Layout editor – Customize drawing layouts easily. Tekla Structures introduces the new and improved Drawing layout editor. You can now customize drawing layouts easily in a separate layout editing mode that shows all the changes you make in real time. Improved rebar coupler and end anchor symbols.

Displaying rebar shapes in drawing templates and in reinforcement mark pull-out pictures has been enhanced, and the rebar scheduling workflow is now more effortless and straightforward. Rebar dimensioning improvements. The creation of dimension marks has been simplified. There is only one rebar dimension mark command that uses the current applied dimension properties for creating dimension marks without tags, tagged dimension marks, distributed dimension lines, or variants of these styles.

There are also changes in the rebar Dimension Properties dialog box, integrated cast unit rebar dimensioning, and Rebar group dimensioning. Other drawing improvements. There are improvements in displaying rebars, Rebar pull-out picture and marking , marks, Document manager , macros, curved dimensions, and drawing performance.

Updates in Template Editor, template handling and reports. There are several improvements in Template Editor. New point cloud settings and other improvements. The Point clouds side pane has been completely renewed. The new point cloud functionalities are available when you have attached a point cloud, and DirectX rendering is active. Other interoperability improvements. There is also a new model format. New formwork placing tools for walls and slabs.

Tekla Structures includes new formwork placing tools: Formwork placing tools – Walls and Formwork placing tools – Slabs. Previously, these tools have been available in Tekla Warehouse. The formwork placing tools enable the efficient modeling of different wall panel and slab panel formwork systems.

Easier Trimble Connect collaboration. There are several improvements regarding the use of Trimble Connect and Trimble Connector. Starting Trimble Connect collaboration is now easier, and new lightweight reference models have been added. New buttons on the ribbon also make it faster to access and work with Trimble Connect and Trimble Connector.

You can now view your rendered models in the virtual reality mode using Trimble Connect Visualizer. New materials have also been added for material mapping between Tekla Structures and Trimble Connect Visualizer. Tekla Model Sharing improvements. There are several improvements to Tekla Model Sharing. For example, you can now view the local changes that you have made in the model but that you have not yet shared to other users.

Object locks have been strengthened. You can now use a folder in a Trimble Connect project as the project or firm folder in Tekla Structures. There are several improvements and fixes in components, for example, in:. Concrete components:. Steel components:.

Base plate , Circular base plates , Base plate , Box column base plate , Tapered column base plate Fixes released in Tekla Structures Release notes – Tekla Structures i SP This service pack makes Tekla Structures compatible with the new and improved Trimble Identity. Release notes – Tekla Structures i SP9. PDF reference models have better coverage for texts. IFC2x3 export output file path is now longer.

There is a new way to control exported reinforcement in Export Unitechnik SketchUp version is supported.

Release notes – Tekla Structures i SP8. Document manager now has new quick access buttons for several commands at the top of the dialog box. Issuing and Show selected documents only now work better in Document manager.

The order of drawings in the printing dialog box is more logical. Curved line accuracy is better in reference models. Release notes – Tekla Structures i SP7.

There are useful new features and improvements in Document manager and in template attributes for rebar sets:. Document manager has two new buttons: The Delete button deletes the selected drawings or file documents, and the Open previous drawing and Open next drawing buttons open the previous or next drawing while a drawing is open. Release notes – Tekla Structures i SP6. There are useful new features and improvements in drawings and components:.

There are improvements in many components, for example, in Edge and corner reinforcement 62 and Auto bolt. Release notes – Tekla Structures i SP5. There are useful new features and improvements in pours, rebar sets, and IFC export:. Release notes – Tekla Structures i SP4. Release notes – Tekla Structures i SP3. Release notes – Tekla Structures i SP2. Release notes – Tekla Structures i SP1. Starting from Tekla Structures i SP1, if you have sketched profiles in your model or you try to import them, Tekla Structures will show a message that a tool needed for solving part geometry is not available.

You can download the Sketch Solver tool from Tekla Warehouse. Trimble Connect Visualizer – Create 3D renderings of your models.

In Trimble Connect Visualizer , you can take snapshots or create animations that demonstrate the design of your models and the build options, and use the snapshots and animations to create more appealing sales and project presentations. Switch between manual and automatic applying in the property pane. When you modify properties in the property pane, you can use the new Set default values automatically option to switch between automatic and manual applying of properties for the next objects of the same type.

Updates to the property pane, UDAs, and to the Property pane editor. The property pane and the Property pane editor have been improved. With these updates, especially the viewing and modifying of user-defined attributes UDAs is easier and more straightforward. There are new options to control the visibility of properties and user-defined attributes in the property pane.

For example, you can control which properties are shown in the property pane without customizing the property pane layout. In the Property pane editor , you can set property groups hidden or visible and copy multiple property groups. Improved search in the property pane finds all the properties and user-defined attributes UDAs that are available for the object type. Copying of properties has been improved. Snapping improvements.

Orthogonal snapping has been changed so that the orthogonal snap points have the lowest priority among the snap points.

Tekla Structures displays a snap tooltip that shows the name of the snap point when you start a command that requires picking points and move the mouse pointer over objects in the model.

The colors related to snapping have been enhanced to make the snapping easier and more accurate. You can set the temporary reference point also by right-clicking when a command is running and selecting the Define temporary snap reference point option. Search in model. You can quickly search for objects in the entire model or within the selected model objects by using the Model search toolbar.

Model search was introduced in Tekla Structures SP1. New part types: lofted plate and lofted slab. Steel lofted plate and concrete lofted slab are introduced as new part types.

Use lofted plates to model rolled plates and plates with double-curved form, for example. Use lofted slabs to model curved and double-curved slabs or walls, for example. Weld clash check, pour management, and other modeling improvements. You can check the model for duplicate and overlapping welds and for clashes that occur between welds and other objects such as parts and bolts.

Numbering has been improved. There are new ways to create item shapes and edit model geometry. In addition to importing item shapes or downloading them from Tekla Warehouse , you can now create shapes using the existing geometry and parts in Tekla Structures models. View improvements. You can show model views, assemblies, and components in different view angles.

Improvements in rebar sets and Rebar shape manager. In addition to the existing bar end options, such as hooks, you can now create cranks using rebar set end detail modifiers.