Whether you plan to нажмите сюда or illustrate multimedia artwork Illustrator offers all the tools needed to produce professional and quality results for even a beginner.

This tutorial will take you through some of the basic uses of Illustrator CS6. Begin by opening Adobe Illustrator CS6.

Figure 1 Figure 1. Navigation to Illustrator CS6 on a Mac. This will require some advanced planning. For example, if your final output will be a brochure, you may need to set up your document to be horizontal and double-sided. See Figure 2 for an example of opening a new document on a Mac. Figure 2. Opening a new document in Illustrator. This will open the Document Setup dialog box. Here you will be able to set up the correct page size and orientation for your document.

Options include, but are not limited to: Page Size: Choose a page size from the menu, or type values for width and height. Page size represents the final size you want after bleeds or trimming other marks outside the page. There are presets for common sizes such as letter, legal and tabloid. To change unit size from points to inches, click on the units drop down and choose inches.

Orientation: Click the Portrait tall or Landscape wide icons. These icons interact dynamically with the dimensions you enter in Page Size.

When Height is the larger value, the Portrait icon is selected. When Width is the larger value, the Landscape icon is selected. Clicking the opposite icon switches the Height and Width values. Document Profile: Choose a profile that will best fit your project. For example, when making a graphic for a brochure, choose Print. When making a graphic for Web, choose Web.

Each document profile has the appropriate presets for your project. When you have entered all of your document settings, click OK.

If you are a novice user of Adobe products you should keep in mind that you might not need to use all the tools. In this tutorial, only the basic tools will be discussed in depth. Figure 3. Tools in Illustrator. Some tools in the toolbox have additional tools linked to them. These tools have small gray triangles in the right-hand corner. To view the additional tools click and hold down on any tool that has a gray triangle in the corner. Figure 4 Figure 4. Extra Tools in Illustrator. If you need to use some of the additional tools often, you can tear off the additional tools into their own читать статью. To Tearoff additional tools, do the following: 1.

Click and hold on the tool you want to see the additional tools adobe illustrator cs6 user guide free. While holding down your mouse button drag your mouse to the end of the tools to the button with the gray triangle. Let go of the mouse button to make the additional tools and new toolbar Figure 5. Figure 5. Sub-Toolbar in Illustrator. Direct Selection tool Selects the contents of a frame, such as a placed graphic; allows you to work directly with editable objects, such as paths, rectangles, or type that has been converted to a text outline.

Group Selection tool Selects a group of points all at once, such as the four points of rectangle. Magic Wand tool Selects all objects in a document with the same or similar fill color, stroke weight, stroke color, opacity, or blending mode.

Lasso adobe illustrator cs6 user guide free Selects objects, anchor points, or path segments by being dragged around all or part of the object. Pen tool Creates a line between two anchor points you make. Creates straight lines if you simply click and release to make anchor points.

Add Anchor Point tool Adds a point to a path, which is a simple way to change any path. This helps to turn one shape into another Delete Anchor Point tool Deletes points from a path without causing a break in the path. Convert Direction Point tool Changes the control handles around an anchor point reshaping the segments controlled by that anchor point.

Type tool Creates resizable and moveable text frames in which you can type text. Type on a Path tool Used to type on an object s path. Line tool Creates straight lines. Ellipse tool Creates ellipse shapes that hold text. Rectangle tool Creates rectangle shapes that hold color or text. Polygon tool Creates polygon shapes that hold color or text.

Paintbrush смотрите подробнее Draws a path and applies a brush stroke simultaneously. Pencil tool Draws open and closed paths as if you were drawing with a pencil on paper.

It is most useful for fast sketching or creating a hand-drawn look. Smooth tool Removes excess angles from an existing path or a section of a path.

Arc tool Creates a curved line segment or a closed, wedge-like shape. Spiral tool Creates a spiral-shaped object of a given radius and number of winds. Grid tool Creates rectangular grids of a specified size with a specified number of dividers. Polar Grid tool Creates concentric circles of a specified size and a specified number of dividers.

Star tool Creates star-shaped objects with a given size and number of points. Flare tool Creates flare objects with a bright center, a halo, and rays and rings. Use this tool to create an effect similar to a lens flare in a photograph. Erase tool Removes part of an existing path or stroke. You can use this tool on paths, but not on text. Rotate tool Changes orientation, or angle, of the object on the page.

Reflect tool Flips the object across an invisible axis that you specify. You can адрес страницы while reflecting to create a mirror image of an object.

Scale tool Scales a selected adobe illustrator cs6 user guide free by being dragged anywhere in the document window. Scales objects relative to their center points, or to any reference point you make anywhere in the document window.

Shear tool Slants or skews an object along its horizontal axis, also rotates both of the object s adobe illustrator cs6 user guide free. Reshape tool Selects one or more anchor points and sections of paths and then adjusts the selected points and paths globally. Warp tool Stretches objects as if they were made of clay.

When you drag or pull portions of an object using this tool, the pulled areas attenuate. Pucker tool Deflates an object by moving control points toward the cursor.

Bloat tool Inflates an object by moving control points away adobe illustrator cs6 user guide free the cursor. Scallop tool Adds random, smooth, arc-shaped details to the outline of an object. Adobe illustrator cs6 user guide free tool Adds random spike- and arc-shaped details to the outline of an object. Wrinkle tool Adds random arc- and spike-shaped details to the outline of an object. Free Transform tool Provides a way to perform any transformation, such as rotating and scaling.

Symbol Spray tool Creates a set of symbol instances or increases more instances to an existing set. Symbol Shift tool Moves symbol instances around. Symbol Scrunch tool Pulls symbol instances together or apart. Use this tool to shape the density distribution of a symbol set. Symbol Size tool Increases or decreases the size of symbol instances in an existing symbol set. Symbol Spin tool Orients the symbol instances in a set. Symbol instances located near the cursor orient in the direction of the cursors movement.

Symbol Stain tool Colorizes продолжить чтение instances changing the hue toward the tint color, while preserving the original luminosity. Symbol Screener tool Increases or decreases the transparency of the symbol instances in a set.

Symbol Style adobe illustrator cs6 user guide free Applies or removes a graphic style from a symbol instance. Column Graph tool Compares one or more sets of values by using rectangles whose lengths are proportional to the values. Stacked Column Graph tool Is similar to a column graph, adobe illustrator cs6 user guide free stacks the columns on top of one another, instead of side by side.

This graph type is useful for showing the relationship of adobe illustrator cs6 user guide free to adobe illustrator cs6 user guide free total. Bar Graph tool Is similar to a перейти на источник graph, but positions the rectangles horizontally instead of vertically.

 
 

 

Adobe illustrator cs6 user guide free.Adobe Photoshop

 
Use this guide to help you understand Illustrator’s features and learn how to create beautiful vector art and illustrations on desktop and. Place multiple files | Illustrator CC. A wide range of tutorials to help you quickly learn and understand the concept, workflow, tips, and tricks.

 
 

Adobe illustrator cs6 user guide free

 
 

Move the marquee to the position you want and let go of the mouse button. NOTE: After you have created your guides you can t move them because they are locked.

Remember to lock guides again after you have unlocked them, or you might accidentally select and move them. Creating clipping masks Clipping masks are shapes that act as windows showing only the artwork located within the boundaries of those shapes. The clipping masked object must be on top of the stack of objects you wish to mask.

To create a clipping mask, do the following: 1. Choose the object you wish to mask with using the Selection tool. Select all objects you wish to include in the mask. Object Arrange. Object Clipping Mask. GROUPING Grouping Objects When there are multiple objects on the art board that you need to move as a whole you can group them instead of selecting each of the objects every time you wish to move them. To group multiple objects, do the following: 1.

Select all of the objects that you want to group together. This can be done in two ways: 1 Hold down the SHIFT key and click on each object individually, 2 Starting in an empty space on the page, click and drag the mouse outward creating a marquee box around all of the objects you want to select.

Grouping Objects. If you click over the newly grouped objects with the selection tool you will notice that they are bound together as one large object. For example, if you have a large image or graphic as a background for the page, you may select it and move it accidentally if you are not careful.

To help you avoid such situations, Illustrator CS6 has a function called Locking. When an object is locked it cannot be moved, adjusted, or altered in any way.

Notice how Illustrator restricts the object from being altered in any way. To do this, you would use the Transparency palette. In this palette you can adjust the Opacity of an object. Under the Transparency tab Figure 17 , you will see a dropdown menu that holds all the blending options for applying transparencies. To apply a transparency, do the following: 1. Select the object you want to apply the transparency to with the Selection tool.

Choose which blending mode you want to use in the transparency. Type in or drag the slider to the amount of opacity you wish to apply. Using styles, you can quickly and globally change the appearance of an object. To add a style, do the following: 1. Select the object with the Selection tool. Click on the Graphic Styles tab Figure Select the style you wish to apply.

Graphic Styles. This can be done by adding multiple effects to an object. To add an effect, do the following: 1. Click on Effect in the menu bar at the top of the screen. Select the effect you want, set the parameters and click OK.

Appearances You can specify which part of an object you add styles and effects to by using effects in the Appearance palette Figure The Appearance palette contains the following types of editable attributes: Fill – lists all fill attributes fill type, color, transparency, and effects Stroke – lists some stroke attributes stroke type, brush, color transparency, and effects Transparency – lists opacity and blending mode NOTE: All other stroke attributes are displayed in the Stroke palette.

You can duplicate strokes and fills in the Appearance palette which allows you to have multiple strokes and fills with different effects and styles on a single object.

An appearance attribute can be changed or removed at any time without changing the original object or any other attributes applied to the objects. Just like layers, you can move your appearances to any order you wish.

Appearance with green, red and blue. Appearance with pink, yellow, and blue. Symbols used in combination with the Symbolism tools offer options that make creating repetitive shapes easy. Creating symbols You can draw and create your own symbols using the Symbols palette.

To create a symbol, do the following: 1. Select an object with the Selection tool. Click on the New Symbol button on the Symbols palette. Delete the original on the art board once your new symbol appears in the Symbols palette. Select the Symbols Sprayer tool from the toolbox and select your new symbol in the palette. Click and drag to apply the symbols to the area you wish. Editing symbols In the Symbols palette you can update attributes of your symbols without deleting the ones you already have on the art board.

To update a symbol, do the following: 1. Click on the Place Symbol Instance button at the bottom of the Symbols palette. This will place the symbol one time in the middle of your page. Release when you see a black border around the original symbol. Saving frequently reduces the risk of losing the work you have been doing.

To save your Illustrator document, do the following: 1. Navigate to the place you would like your document to be saved by using the dropdown menu and the navigation window. Enter the name of your document in the Save As text field. Choose a format to save your project in from the Format dropdown menu. Click the Save button in the bottom right corner of the dialogue box. Check to make sure that your document is saved in the place you intended.

Working With Animation: Introduction to Flash With Adobe Flash, you can create artwork and animations that add motion and visual interest to your Web pages. Flash movies can be interactive users can click. Lession: 2 Animation Tool: Synfig In previous chapter we learn Multimedia and basic building block of multimedia. To create a multimedia presentation using these building blocks we need application programs. Workspace tour Welcome to CorelDRAW, a comprehensive vector-based drawing and graphic-design program for the graphics professional.

In this tutorial, you will become familiar with the terminology and workspace. ClarisWorks 5. Page 3 Course Description and Organization Page 4 Technology Requirements Now, don t go letting your imagination run wild here. When I say warped,. Today we want a poster that is 4 feet 48 inches wide and 3 feet tall. Under width, type 48 in. Contents 1. Introduction 1.

Starting Publisher 2. Create a Poster Template 5. Aligning your images and text 7. Apply a background Add text to your poster Add pictures to your poster Add graphs. Start Illustrator. Open the lizard. Adding shapes, text, and pictures. Searching the Gallery. Arranging objects. Graphic Design Active Layer- When you create multi layers for your images the active layer, or the only one that will be affected by your actions, is the one with a blue background in your layers palette.

How to build text and objects in the Titler You can use the Titler in Adobe Premiere Pro to create text and geometric objects. There are three methods for creating text, each capable of producing either. All rights reserved. Start a new file in the Part. These are easily interchangeable and the toolbars. SketchUp is free from Google just Google it and download to your computer. You can do just about anything with it, but it is especially.

Dear Candidate, In preparation for the Graphic Design and Illustration certification exam, we ve put together a set of practice materials and example exam items for you to review. What you ll find in this. When the Project Gallery opens, view some of the available Word templates by clicking to expand the Groups, and. Designing a poster Poster is seldom linear, more like a MindMap The subjects belonging together are located close to each other.

Big is important. Warm colours bring closer, cold ones estrange. A human. Then in PowerPoint: A set up the poster size and orientation, B add and. Logo Design Studio Pro Guide This guide is distributed with software that includes an end-user agreement, this guide, as well as the software described in it, is furnished under license and may be used. Box , Statesboro, GA Open up Microsoft PowerPoint Before you begin, save your file to your H drive.

Under the header that says Organize. How to Use the Drawing Toolbar in Microsoft Word The drawing toolbar allows you to quickly and easily label pictures e. You can add arrows, circle spots, or label with words. Microsoft Excel Charts and Graphs Email: training health.

Design document Goal OpenOrienteering Mapper is a program to draw orienteering maps. It helps both in the surveying and the following final drawing task. Support for course setting is not a priority because. Why use Publisher instead of Word for creating fact sheets, brochures, posters, newsletters, etc.?

While both Word and Publisher can create documents. User s Manual Table of Contents I. Banner Design Studio Overview Banner Creation Methods Copyright This document is Copyright by its contributors as listed in the section titled Authors. PowerPoint presentations are composed of slides, just like conventional presentations. Like a 35mm film-based slide, each PowerPoint slide. Creating a Poster in Powerpoint January Contents 1. Starting Powerpoint 2. Setting Size and Orientation 3.

Display a Grid 5. Apply a background 7. Add text to your poster 9. Add WordArt to your poster. Intro to Excel spreadsheets What are the objectives of this document? The objectives of document are: 1. Familiarize you with what a spreadsheet is, how it works, and what its capabilities are; 2. Using Microsoft Word Many Word documents will require elements that were created in programs other than Word, such as the picture to the right.

Nontext elements in a document are referred to as Objects. If this tutorial is distributed with software that includes an end user agreement, this guide, as well as the software described. Creating an invitation Michaela Maginot Concept and design Invitation complete with gift box, card, and transparent envelope. For more options, please visit www. The goal was. April 20, Publisher Cheat Sheet Toolbar customize click on arrow and then check the ones you want a shortcut for File Tab has new, open save, print, and shows recent documents, and has choices.

Adjust text with the Character panel and change alignment with the Paragraph panel or Control. Microsoft Word can be used to create documents,. Introduction We will focus on:. Printing to the Poster Printer Document size The HP Design Jet Zps uses a roll of paper that is 36 wide, however it does not print all the way to the edge of the paper known as a bleed.

One dimension. Linkage 3. In the following tutorial you will learn how to create a simple circus tent icon. You may discover some interesting things about. Graphic Design Studio Guide This guide is distributed with software that includes an end-user agreement, this guide, as well as the software described in it, is furnished under license and may be used.

Recipes4Success You can use the drawing tools and path animation tools in Frames to create illustrated cartoons. In this Recipe, you will draw and animate a rocket ship. All Rights Reserved. Creating a logo Welcome to CorelDRAW, a comprehensive vector-based drawing and graphic-design program for the graphics professional.

In this tutorial, you will create a logo for an imaginary coffee shop. Microsoft Publisher What s New! A new. Winter This guide is intended as a companion to another guide, Making a Figure Using Adobe Illustrator, also available on my web site.

The Illustrator Toolbar. You ll get hands-on experience using the industry s leading. C: Options bar- controls specific to the tool you are using at the time. Register online at www. All right reserved. Edraw and Edraw logo are registered trademarks of EdrawSoft. Contents Professional. Your user role in a meeting determines your level of file sharing. The type of files you can share include documents, presentations, and videos.

A data plot must be set active before you can use the Data Selector. Tutorials The lesson schedules for these tutorials were installed when you installed Milestones Professional If you have any questions, comments,. The following are the outlines: 1. Start Microsoft Word Describe the Word Screen. My Custom Design ver. Interactive Voting System www. Motion-Tweened Animation With motion tweening, you can easily create motion effects for the objects in your Flash movies.

Kites flying, balls bouncing, rocks rolling. Contributors are listed below. You may distribute. Running Descriptive and Correlational Analysis in Excel Tips for coding a survey Use short phrases for your data table headers to keep your worksheet neat, you can always edit the labels in tables.

Laser cutter setup instructions: 1. Cut your material to 18 x 24 or smaller. Turn on the laser cutter by flipping the wall switch on the right behind Station B. You will hear the cooling fan and air. Working with Tables in Microsoft Word The purpose of this document is to lead you through the steps of creating, editing and deleting tables and parts of tables.

This document follows a tutorial format. Operation Photoshop 5. DraftSight is more than a free, professional-grade. Log in Registration. Search for. Adobe Illustrator CS6 Tutorial. Size: px. Start display at page:. Stephanie Higgins 6 years ago Views:. Similar documents. Flash movies can be interactive users can click More information.

To create a multimedia presentation using these building blocks we need application programs More information. Welcome to CorelDRAW, a comprehensive vector-based drawing and graphic-design program for the graphics professional.

In this tutorial, you will become familiar with the terminology and workspace More information. Graphics ClarisWorks 5. Page More information. When I say warped, More information. Under width, type 48 in More information. Create a Poster Using Publisher Contents 1. Add graphs More information. User Guide. Arranging objects More information. Graphic Design. Background: The part of an artwork that appears to be farthest from the viewer, or in the distance of the scene.

More information. How to build text and objects in the Titler How to build text and objects in the Titler You can use the Titler in Adobe Premiere Pro to create text and geometric objects.

There are three methods for creating text, each capable of producing either More information. Start a new file in the Part More information. These are easily interchangeable and the toolbars More information. You can do just about anything with it, but it is especially More information.

The complete beginners guide to Adobe Illustrator. Dear Candidate, Thank you, Adobe Education Dear Candidate, In preparation for the Graphic Design and Illustration certification exam, we ve put together a set of practice materials and example exam items for you to review. What you ll find in this More information. Introduction to Microsoft Word 1. When the Project Gallery opens, view some of the available Word templates by clicking to expand the Groups, and More information.

Designing a poster. Poster is seldom linear, more like a MindMap. The subjects belonging together are located close to each other.

A human More information. Creating a Poster in PowerPoint Logo Design Studio Pro Guide Logo Design Studio Pro Guide This guide is distributed with software that includes an end-user agreement, this guide, as well as the software described in it, is furnished under license and may be used More information. Box , Statesboro, GA More information. Under the header that says Organize More information. Support for course setting is not a priority because More information.

While both Word and Publisher can create documents More information. Table of Contents. User Interface Drawing in Microsoft Word Copyright This document is Copyright by its contributors as listed in the section titled Authors. This More information. Like a 35mm film-based slide, each PowerPoint slide More information. Add WordArt to your poster More information.

Do you have a question about the Adobe Illustrator CS6 or do you need help? Ask your question here. Do you have a question about the Adobe Illustrator CS6 and the answer is not in the manual? Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Adobe Illustrator CS6 owners to provide you with a good answer.

Below you will find the product specifications and the manual specifications of the Adobe Illustrator CS6. Can’t find the answer to your question in the manual? Is your question not listed? Adobe Illustrator CS6 manual. Page: 1. Index Contents. Need help? Ask a question. I also would like to download the manual for Illustrator CS6.

Answer this question Add my comment.